FWM7BTZ61-E2

图片仅供参考

Description: BT 5.0 DUAL MODE CYW20819 SAMP 生产商: FUJITSU 产品描述代码: FWM7BTZ61-E2 Rutronik No.: RFMCU1734 包装单位: 1 最低订购量: 500 封装: SMT 包装: INDIVIDUAL

查找替代产品

数据手册添加到项目列表样品

Download the free Library Loader to convert this file for your ECAD Tool

参数

最低频率: 2400 MHz
最高频率: 2483,5 MHz
数据速率: 3072 kbps
工作温度最小值: -30 °C
内存: FLASH
存储容量: 128 kB
最小电源容量: 1,71 V
P(out): 3 dBm
内存: 16 kB
GPIO: 6 no.
串列周边介面: YES
其他接口: UART, GATT
Modulation: GFSK
工作温度最大值: 85 °C
最大电源容量: 3,63 V
P(tot): NO
封装: SMT
RoHS Status: RoHS-conform
包装: INDIVIDUAL

出口控制分类编号: EAR99
海关税号: 85176200000
国家或地区: United States
生产商交期: 16 周

描述

The fully integrated FWM7BTZ61 series is powered by Cypress Semiconductor's CYW20819 SoC and features Bluetooth Low Energy profile and Bluetooth Classic (BR/EDR) power class 2 capabilities in a single module. It also supports Bluetooth Ver. 5.0’s signature X2 communication.

The symbol rate and data rate accommodates both 1Mbps and improved 2Mbps to facilitate communication speed with other Bluetooth Low Energy devices. In addition, Classic mode supports 1Mbps (BR: basic rate) and 2 and 3Mbps (EDR: Enhanced Data Rate) communication.

The series also supports a wide range of operating voltages from 1.71V to 3.63V, which enables the mating with various system design and power supply conditions.

To accommodate different design needs, the series portfolio includes two, fully certified models:

One contains SPP (Serial Port Profile) for Bluetooth Classic, and GATT profile for Bluetooth Low Energy. SPP is the most common profile for serial communication applications, and GATT profile enables all Bluetooth communications with other modules through the GATT layer in the module by using a simple text command via UART.
One replaces the GATT Direct Access profile with Fujitsu Components’ unique embedded firmware, which enables simple text-based commands via UART to control all Bluetooth commands and parameters and simplifies a customer’s firmware development.

This product can also be connected to the Apple Authentication 3.0 Coprocessor ("Auth. 3.0 CP") to send and receive data with application software on iOS devices. (Note 1).